Structure and service condition of quenching furnace
The furnace body is welded by section steel and steel plate, the inner wall of quenching furnace lining is connected with furnace shell by stainless steel plate, and the interlayer of furnace body and furnace liner is filled with aluminum silicate refractory fiber for heat insulation.
The furnace door is designed at the lower part of the furnace body, that is to say, the work pieces enter or exit from the bottom. The lower opening of quenching furnace body is opened, and the opening and closing action of furnace door adopts mechanical transmission mode, which is completed by motor, reducer, sprocket, chain, track, etc.
1. Indoor use.
2. The ambient temperature is in the range of – 5 ℃ - 40 ℃.
3. The monthly average maximum relative humidity is not more than 85% and the monthly average temperature is not more than 30 ℃.
4. There is no conductive dust, explosive gas and corrosive gas that can seriously damage metal and insulation.
5. No obvious vibration and turbulence.
Copyright: Suzhou Jinkai Technology Co., Ltd. | industrial furnace, mesh belt furnace, quenching furnace, annealing furnace, pusher furnace, idler furnace, roller hearth furnace, roller bar furnace, roller furnace, manufacturer
Address: Shengpu District, Suzhou Industrial Park Tel: 0512-62871358, 62532922 Fax: 0512-62871368 e-mail: info@sz-jkkj.com
All information of this website can't be reprinted. Our company reserves the right to investigate the legal responsibility. technical support:晨光科技 Record No:蘇ICP備09050200號(hào)-1